Pharaoh Revival Necklace
SKU:
$124.00
$124.00
Copper Geometric Necklace - Pharaoh Revival Design
Inspired by Armatures of Bridge Structures and Danish + Normandy Half Timbering
made and designed by me in my studio in Tx
★NOTE★This item is MADE TO ORDER and requires 2-3 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658
All other items in my shop require production time before shipment.
Featured on design-milk.com
http://design-milk.com/egypt-inspired-jewelry-by-jamie-spinello/
Handmade from copper wire that has been rolled, cut, configured, soldered, and blackened.
Production requirements for me to produce this piece is apx 2 weeks.
Geometric Necklace designs:
http://www.etsy.com/shop/jamiespinello/search?search_query=geometric+necklace
more GEOMETRIC designs:
http://www.etsy.com/shop/jamiespinello/search?search_query=geometric
I make bracelets, cuffs, earrings and rings too! Don't forget to check out my other designs!
http://www.jamiespinello.etsy.com
All of my designs are under copyright protection © Jamie Spinello 2012
Registered with the US Copyright Office > If you see an unauthorized site selling my work please let me know.
Inspired by Armatures of Bridge Structures and Danish + Normandy Half Timbering
made and designed by me in my studio in Tx
★NOTE★This item is MADE TO ORDER and requires 2-3 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658
All other items in my shop require production time before shipment.
Featured on design-milk.com
http://design-milk.com/egypt-inspired-jewelry-by-jamie-spinello/
Handmade from copper wire that has been rolled, cut, configured, soldered, and blackened.
Production requirements for me to produce this piece is apx 2 weeks.
Geometric Necklace designs:
http://www.etsy.com/shop/jamiespinello/search?search_query=geometric+necklace
more GEOMETRIC designs:
http://www.etsy.com/shop/jamiespinello/search?search_query=geometric
I make bracelets, cuffs, earrings and rings too! Don't forget to check out my other designs!
http://www.jamiespinello.etsy.com
All of my designs are under copyright protection © Jamie Spinello 2012
Registered with the US Copyright Office > If you see an unauthorized site selling my work please let me know.
Iron Maiden Cage Cuff
$165.00
Copper Cuff Bracelet - The Automaton Warrior - Cage Bracelet - warrior cuff ~MADE TO ORDER~ unisex ♀ ♂ available in either high polish copper or sanded black
★NOTE★This item is MADE TO ORDER and requires 2-3 weeks for production by hand in my studio. Please keep this in mind when ordering.
Sizing: S 5"-7", M 6"-8", L 7"- 9" (measurements based on circumference of wrist) second measurement needed for circumference of forearm as well.....please list during checkout Length: from wrist to mid arm in photo is apx 4.5-4.75" long ( I can make shorter or longer ones upon discussion, but discuss first before ordering/pricing for longer ones may increase)
Also available in shiny copper: http://www.etsy.com/listing/90083327/automaton-copper-cuff-bracelet-cage I designed it with both architectural armatures and automatons in mind. After seeing the movie Hugo and seeing the wonderful automaton (robot) figure, I felt compelled to make something in response to it. This is a very thick soldered copper cuff (14g flattened copper wire) constructed with a torch, then blackened and sanded to a very medieval looking finish before being sealed.
►Each is made to match my prototype and is one of a kind and unique (please specify size) Note ~ cuff tapers to fit arm, it is smaller in the front and gets wider as it goes up the arm ►More CAGE / AUTOMATON designs in my shop http://www.etsy.com/shop/jamiespinello/search?search_query=cage
►This design is 100% made by me in my Tx studio from copper
© Jamie Spinello 2012 Registered with the US Copyright Office > If you see an unauthorized site selling my work please let me know.
★NOTE★This item is MADE TO ORDER and requires 2-3 weeks for production by hand in my studio. Please keep this in mind when ordering.
Sizing: S 5"-7", M 6"-8", L 7"- 9" (measurements based on circumference of wrist) second measurement needed for circumference of forearm as well.....please list during checkout Length: from wrist to mid arm in photo is apx 4.5-4.75" long ( I can make shorter or longer ones upon discussion, but discuss first before ordering/pricing for longer ones may increase)
Also available in shiny copper: http://www.etsy.com/listing/90083327/automaton-copper-cuff-bracelet-cage I designed it with both architectural armatures and automatons in mind. After seeing the movie Hugo and seeing the wonderful automaton (robot) figure, I felt compelled to make something in response to it. This is a very thick soldered copper cuff (14g flattened copper wire) constructed with a torch, then blackened and sanded to a very medieval looking finish before being sealed.
►Each is made to match my prototype and is one of a kind and unique (please specify size) Note ~ cuff tapers to fit arm, it is smaller in the front and gets wider as it goes up the arm ►More CAGE / AUTOMATON designs in my shop http://www.etsy.com/shop/jamiespinello/search?search_query=cage
►This design is 100% made by me in my Tx studio from copper
© Jamie Spinello 2012 Registered with the US Copyright Office > If you see an unauthorized site selling my work please let me know.
Geometric Slice Earrings
$40.00
Geometric Earrings - Copper - Black Finish - Slice Design - handmade in Austin, Tx
100% handmade by me in my studio (made to order-each pair is one of a kind)
★NOTE★This item is MADE TO ORDER and requires apx 2 weeks for production by hand in my studio. Please keep this in mind when ordering.
I make everything in my studio from copper wire and copper sheet. These earrings are made from flattened copper wire that I cut, composed, and soldered into place. The black finish is chemically induced and sealed with a lacquer for resilience.
Size: Apx sz: .75"w x 3.25"L - I can make larger or smaller ones for you if you like - add to notes
Finishes: available in blackened or high polish shiny copper, please specify which you want
I love curved corners, concentric triangles and using angles to create interesting structures. Lately I have been interested in seeing where combining 45 degree and 90 degree angles can take me. These have an art deco feel to them, which I have been drawn towards for the last couple of years as I look at blue prints of bridges, buildings and airplanes for inspiration. In addition to the art deco movement, the design of these earrings specifically emerged from my recent fascination with embellished exterior slatting on tudor style houses. ex: decorative half timbering
All of my designs are under copyright protection © Jamie Spinello 2012
Registered with the US Copyright Office > If you see an unauthorized site selling my work please let me know.
100% handmade by me in my studio (made to order-each pair is one of a kind)
★NOTE★This item is MADE TO ORDER and requires apx 2 weeks for production by hand in my studio. Please keep this in mind when ordering.
I make everything in my studio from copper wire and copper sheet. These earrings are made from flattened copper wire that I cut, composed, and soldered into place. The black finish is chemically induced and sealed with a lacquer for resilience.
Size: Apx sz: .75"w x 3.25"L - I can make larger or smaller ones for you if you like - add to notes
Finishes: available in blackened or high polish shiny copper, please specify which you want
I love curved corners, concentric triangles and using angles to create interesting structures. Lately I have been interested in seeing where combining 45 degree and 90 degree angles can take me. These have an art deco feel to them, which I have been drawn towards for the last couple of years as I look at blue prints of bridges, buildings and airplanes for inspiration. In addition to the art deco movement, the design of these earrings specifically emerged from my recent fascination with embellished exterior slatting on tudor style houses. ex: decorative half timbering
All of my designs are under copyright protection © Jamie Spinello 2012
Registered with the US Copyright Office > If you see an unauthorized site selling my work please let me know.
Automaton Copper Cuff Gauntlet
$165.00
Copper Cuff Bracelet - The Automaton Warrior - Cage Bracelet - warrior cuff - new art deco
★NOTE★This item is MADE TO ORDER and requires 2 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658
All other items in my shop require production time before shipment.
~MADE TO ORDER~ unisex ♀ ♂
comes in all sizes (lets discuss what size you need/ I have a template for measurement)
Sizing: S 5"-7", M 6"-8", L 7"- 9" (measurements based on circumference of wrist)
second measurement needed for circumference of forearm as well.....please list during checkout
Length: from wrist to mid arm in photo is apx 4.5-4.75" long ( I can make shorter or longer ones upon discussion, but discuss first before ordering/pricing for longer ones may increase)
Also available in black:
http://www.etsy.com/listing/90106509/automaton-copper-cuff-bracelet-cage
I designed it with both architectural armatures and automatons in mind. After seeing the movie Hugo and seeing the wonderful automaton (robot) figure, I felt compelled to make something in response to it. This is my latest design and one of my most striking. This is a very thick soldered copper cuff (14g flattened copper wired) constructed with a torch.
►Each is made to match my prototype and is one of a kind and unique (please specify size) Note ~ cuff tapers to fit arm, it is smaller in the front and gets wider as it goes up the arm
Process photos of me creating it on my fb page. www.facebook.com/spinellojewelry
►More CAGE / AUTOMATON designs in my shop:
http://www.etsy.com/shop/jamiespinello/search?search_query=cage
►more CUFF designs:
http://www.etsy.com/shop/jamiespinello/search?search_query=cuff
►This design is 100% made by me in my Tx studio from reclaimed copper.
~Also available in Blackened copper~ specify at checkout please.
►►►Please allow 16 days for production unless discussed.
Sizing: Please discuss your measurements with me so that I can create the perfect fit.
my shop:
http://www.jamiespinello.etsy.com
Ask me about how to receive special coupons for discounts in my shop!
All of my designs are under copyright protection © Jamie Spinello 2012
Registered with the US Copyright Office > If you see an unauthorized site selling my work please let me know.
★NOTE★This item is MADE TO ORDER and requires 2 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658
All other items in my shop require production time before shipment.
~MADE TO ORDER~ unisex ♀ ♂
comes in all sizes (lets discuss what size you need/ I have a template for measurement)
Sizing: S 5"-7", M 6"-8", L 7"- 9" (measurements based on circumference of wrist)
second measurement needed for circumference of forearm as well.....please list during checkout
Length: from wrist to mid arm in photo is apx 4.5-4.75" long ( I can make shorter or longer ones upon discussion, but discuss first before ordering/pricing for longer ones may increase)
Also available in black:
http://www.etsy.com/listing/90106509/automaton-copper-cuff-bracelet-cage
I designed it with both architectural armatures and automatons in mind. After seeing the movie Hugo and seeing the wonderful automaton (robot) figure, I felt compelled to make something in response to it. This is my latest design and one of my most striking. This is a very thick soldered copper cuff (14g flattened copper wired) constructed with a torch.
►Each is made to match my prototype and is one of a kind and unique (please specify size) Note ~ cuff tapers to fit arm, it is smaller in the front and gets wider as it goes up the arm
Process photos of me creating it on my fb page. www.facebook.com/spinellojewelry
►More CAGE / AUTOMATON designs in my shop:
http://www.etsy.com/shop/jamiespinello/search?search_query=cage
►more CUFF designs:
http://www.etsy.com/shop/jamiespinello/search?search_query=cuff
►This design is 100% made by me in my Tx studio from reclaimed copper.
~Also available in Blackened copper~ specify at checkout please.
►►►Please allow 16 days for production unless discussed.
Sizing: Please discuss your measurements with me so that I can create the perfect fit.
my shop:
http://www.jamiespinello.etsy.com
Ask me about how to receive special coupons for discounts in my shop!
All of my designs are under copyright protection © Jamie Spinello 2012
Registered with the US Copyright Office > If you see an unauthorized site selling my work please let me know.
Turning of the Square Cuff
$115.00
Warrior cuff - Copper Cuff bracelet - Turning of the Square - Skeletal Jewelry - rebirth symbol
~MADE TO ORDER~ unisex ♀ ♂ available in either high polish copper or black
Features an 8 pointed star which represents rebirth and renewal.
*Made to Order - requires 2-3 weeks for production - please select wrist size so I can make a cuff that will be a good fit
Each one is 100% handmade from scratch, so no two can ever be exactly alike.
Sizing: adjustable (measurements based on circumference of wrist)
5"- 6"
6"-7"
7"-8"
This design is a variation upon my many other copper cage cuffs that I have made over the years. This one is inspired by the a Merkaba symbol.
►Each is made to match my prototype and is one of a kind and unique (please specify size) Note ~ cuff tapers to fit arm, it is smaller in the front and gets wider as it goes up the arm
►More CAGE / AUTOMATON designs in my shop
http://www.etsy.com/shop/jamiespinello/search?search_query=cage
►This design is 100% hand built and made by me in my studio from copper.
►►►Please allow 16 business days for production unless discussed.
my shop:
http://www.jamiespinello.etsy.com
All of my designs are under copyright protection © Jamie Spinello 2012
Registered with the US Copyright Office > If you see an unauthorized site selling my work please let me know.
~MADE TO ORDER~ unisex ♀ ♂ available in either high polish copper or black
Features an 8 pointed star which represents rebirth and renewal.
*Made to Order - requires 2-3 weeks for production - please select wrist size so I can make a cuff that will be a good fit
Each one is 100% handmade from scratch, so no two can ever be exactly alike.
Sizing: adjustable (measurements based on circumference of wrist)
5"- 6"
6"-7"
7"-8"
This design is a variation upon my many other copper cage cuffs that I have made over the years. This one is inspired by the a Merkaba symbol.
►Each is made to match my prototype and is one of a kind and unique (please specify size) Note ~ cuff tapers to fit arm, it is smaller in the front and gets wider as it goes up the arm
►More CAGE / AUTOMATON designs in my shop
http://www.etsy.com/shop/jamiespinello/search?search_query=cage
►This design is 100% hand built and made by me in my studio from copper.
►►►Please allow 16 business days for production unless discussed.
my shop:
http://www.jamiespinello.etsy.com
All of my designs are under copyright protection © Jamie Spinello 2012
Registered with the US Copyright Office > If you see an unauthorized site selling my work please let me know.
Copper Necklace - Asymmetrical Design
$52.00
Copper Necklace - Asymmetrical Design - hand forged copper jewelry
★NOTE★This item is MADE TO ORDER and requires 2 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658
All other items in my shop require production time before shipment.
100% Copper
Handmade in my studio / One of a kind ~made to order~!
Can be worn shorter or longer-two ring attachments for adjustment.
I wanted to create something elegant but also not necessarily simple. This design grabs attention with its numerous inter connected rings of different sizes. It is an asymmetrical design but is balanced.
Production time is 2 weeks with 2-3 day shipping via usps priority. Rushing orders is possible, but please make sure to request this so I can let you know for sure.
Browse my other one of a kind necklace designs:
http://www.etsy.com/shop/jamiespinello?section_id=6228344
I make bracelets, cuffs, earrings and rings too! Don't forget to check out my other designs!
http://www.jamiespinello.etsy.com
★NOTE★This item is MADE TO ORDER and requires 2 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658
All other items in my shop require production time before shipment.
100% Copper
Handmade in my studio / One of a kind ~made to order~!
Can be worn shorter or longer-two ring attachments for adjustment.
I wanted to create something elegant but also not necessarily simple. This design grabs attention with its numerous inter connected rings of different sizes. It is an asymmetrical design but is balanced.
Production time is 2 weeks with 2-3 day shipping via usps priority. Rushing orders is possible, but please make sure to request this so I can let you know for sure.
Browse my other one of a kind necklace designs:
http://www.etsy.com/shop/jamiespinello?section_id=6228344
I make bracelets, cuffs, earrings and rings too! Don't forget to check out my other designs!
http://www.jamiespinello.etsy.com
Copper Fringe Necklace - Cascading Bars
$50.00
Cascade Copper Bar Necklace
Handmade in my studio in Tx
★NOTE★This item is MADE TO ORDER and requires 2 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658
All other items in my shop require production time before shipment.
Hammered Copper fringe necklace on an elegant copper chain that is adjustable to be worn as a choker or below the collar bone as pictured. Center piece of metal is approximately 4" long, but the length can be customized upon request. This necklace catches the light beautifully and reminds me of a cascading waterfall. Sealed with lacquer to retain finish.
Browse my other one of a kind necklace designs:
http://www.etsy.com/shop/jamiespinello?section_id=6228344
my shop:
http://www.jamiespinello.etsy.com
Handmade in my studio in Tx
★NOTE★This item is MADE TO ORDER and requires 2 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658
All other items in my shop require production time before shipment.
Hammered Copper fringe necklace on an elegant copper chain that is adjustable to be worn as a choker or below the collar bone as pictured. Center piece of metal is approximately 4" long, but the length can be customized upon request. This necklace catches the light beautifully and reminds me of a cascading waterfall. Sealed with lacquer to retain finish.
Browse my other one of a kind necklace designs:
http://www.etsy.com/shop/jamiespinello?section_id=6228344
my shop:
http://www.jamiespinello.etsy.com
Copper Fringe Freya Necklace
$30.00
Copper Freya Necklace - handmade in my studio in Austin, Tx - made by Jamie Spinello
★NOTE★This item is MADE TO ORDER and requires 2 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658
All other items in my shop require production time before shipment.
Hammered copper wire cut into a v pattern that hangs from a thin copper horseshoe on a delicate copper chain.
Necklace Length:
16" and 18" adjustable hook in
shown being worn at 16" in pictures
*exact measurement of pendant section and new pic with ruler coming soon*
I can however make it whatever length you need. Please just let me know during checkout if you need a longer length.
Fanned/Fringe metal necklaces:
http://www.etsy.com/shop/jamiespinello/search?search_query=fringe
Browse my other one of a kind necklace designs:
http://www.etsy.com/shop/jamiespinello?section_id=6228344
I make bracelets, cuffs, earrings and rings too! Don't forget to check out my other designs!
http://www.jamiespinello.etsy.com
★NOTE★This item is MADE TO ORDER and requires 2 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658
All other items in my shop require production time before shipment.
Hammered copper wire cut into a v pattern that hangs from a thin copper horseshoe on a delicate copper chain.
Necklace Length:
16" and 18" adjustable hook in
shown being worn at 16" in pictures
*exact measurement of pendant section and new pic with ruler coming soon*
I can however make it whatever length you need. Please just let me know during checkout if you need a longer length.
Fanned/Fringe metal necklaces:
http://www.etsy.com/shop/jamiespinello/search?search_query=fringe
Browse my other one of a kind necklace designs:
http://www.etsy.com/shop/jamiespinello?section_id=6228344
I make bracelets, cuffs, earrings and rings too! Don't forget to check out my other designs!
http://www.jamiespinello.etsy.com
Copper Necklace - Blackened
$40.00
Copper Necklace - Blackened - circle design - hand forged copper jewelry - made in my studio in Tx
★NOTE★This item is MADE TO ORDER and requires 2 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658
All other items in my shop require production time before shipment.
100% Copper
Handmade in my studio / One of a kind ~made to order~!
Can be worn shorter or longer-two ring attachments for adjustment.
This is a variation on my asymmetrical design that I make. This one is smaller, blackened, and a bit more symmetrical. If you want to check out my original asymmetrical design you can find it here:
https://www.etsy.com/listing/63640670
Production time is 2 weeks with 2-3 day shipping via usps priority. Rushing orders is possible, but please make sure to request this so I can let you know for sure.
Browse my other one of a kind necklace designs:
http://www.etsy.com/shop/jamiespinello?section_id=6228344
I make bracelets, cuffs, earrings and rings too! Don't forget to check out my other designs!
http://www.jamiespinello.etsy.com
★NOTE★This item is MADE TO ORDER and requires 2 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658
All other items in my shop require production time before shipment.
100% Copper
Handmade in my studio / One of a kind ~made to order~!
Can be worn shorter or longer-two ring attachments for adjustment.
This is a variation on my asymmetrical design that I make. This one is smaller, blackened, and a bit more symmetrical. If you want to check out my original asymmetrical design you can find it here:
https://www.etsy.com/listing/63640670
Production time is 2 weeks with 2-3 day shipping via usps priority. Rushing orders is possible, but please make sure to request this so I can let you know for sure.
Browse my other one of a kind necklace designs:
http://www.etsy.com/shop/jamiespinello?section_id=6228344
I make bracelets, cuffs, earrings and rings too! Don't forget to check out my other designs!
http://www.jamiespinello.etsy.com
Pharaoh Revival Earrings
$70.00
Geometric Earrings - Pharaoh Design - Black Finish - Art Deco and Prairie school revival
100% handmade by me in my studio upon order (made to order-each pair is one of a kind)
★NOTE★This item is MADE TO ORDER and requires apx 2 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658
All other items in my shop require production time before shipment.
If faster shipment is needed, please discuss with me before ordering.
*Recently featured on design-milk.com !!!*
I make everything in my studio from copper wire and copper sheet. These earrings are made from flattened copper wire that I cut, composed, and soldered into place. The black finish is chemically induced and sealed with a lacquer for resilience.
Size: Apx sz: 2"w x 3.5"L - I can make larger or smaller ones for you if you like
Finishes: available in blackened or high polish shiny copper, please specify which you want
I love curved corners, concentric triangles and using angles to create interesting structures. Lately I have been interested in seeing where combining 45 degree and 90 degree angles can take me. These have an art deco feel to them, which I have been drawn towards for the last couple of years as I look at blue prints of bridges, buildings and airplanes for inspiration. In addition to the art deco movement, the design of these earrings specifically emerged from my recent fascination with embellished exterior slatting on tudor style houses. ex: decorative half timbering
GEOMETRIC collection:
http://www.etsy.com/shop/jamiespinello/search?search_query=geometric
checkout other my other earring designs here:
http://www.etsy.com/shop/jamiespinello?section_id=6228346
►►►Please allow 14 days for production
All of my designs are under copyright. © Jamie Spinello 2012
Registered with the US Copyright Office > duplications of this design will be prosecuted
http://www.jamiespinello.etsy.com
100% handmade by me in my studio upon order (made to order-each pair is one of a kind)
★NOTE★This item is MADE TO ORDER and requires apx 2 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658
All other items in my shop require production time before shipment.
If faster shipment is needed, please discuss with me before ordering.
*Recently featured on design-milk.com !!!*
I make everything in my studio from copper wire and copper sheet. These earrings are made from flattened copper wire that I cut, composed, and soldered into place. The black finish is chemically induced and sealed with a lacquer for resilience.
Size: Apx sz: 2"w x 3.5"L - I can make larger or smaller ones for you if you like
Finishes: available in blackened or high polish shiny copper, please specify which you want
I love curved corners, concentric triangles and using angles to create interesting structures. Lately I have been interested in seeing where combining 45 degree and 90 degree angles can take me. These have an art deco feel to them, which I have been drawn towards for the last couple of years as I look at blue prints of bridges, buildings and airplanes for inspiration. In addition to the art deco movement, the design of these earrings specifically emerged from my recent fascination with embellished exterior slatting on tudor style houses. ex: decorative half timbering
GEOMETRIC collection:
http://www.etsy.com/shop/jamiespinello/search?search_query=geometric
checkout other my other earring designs here:
http://www.etsy.com/shop/jamiespinello?section_id=6228346
►►►Please allow 14 days for production
All of my designs are under copyright. © Jamie Spinello 2012
Registered with the US Copyright Office > duplications of this design will be prosecuted
http://www.jamiespinello.etsy.com
Pharaoh Revival Necklace
$124.00
Copper Geometric Necklace - Pharaoh Revival Design
Inspired by Armatures of Bridge Structures and Danish + Normandy Half Timbering
made and designed by me in my studio in Tx
★NOTE★This item is MADE TO ORDER and requires 2-3 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658
All other items in my shop require production time before shipment.
Featured on design-milk.com
http://design-milk.com/egypt-inspired-jewelry-by-jamie-spinello/
Handmade from copper wire that has been rolled, cut, configured, soldered, and blackened.
Production requirements for me to produce this piece is apx 2 weeks.
Geometric Necklace designs:
http://www.etsy.com/shop/jamiespinello/search?search_query=geometric+necklace
more GEOMETRIC designs:
http://www.etsy.com/shop/jamiespinello/search?search_query=geometric
I make bracelets, cuffs, earrings and rings too! Don't forget to check out my other designs!
http://www.jamiespinello.etsy.com
All of my designs are under copyright protection © Jamie Spinello 2012
Registered with the US Copyright Office > If you see an unauthorized site selling my work please let me know.
Inspired by Armatures of Bridge Structures and Danish + Normandy Half Timbering
made and designed by me in my studio in Tx
★NOTE★This item is MADE TO ORDER and requires 2-3 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658
All other items in my shop require production time before shipment.
Featured on design-milk.com
http://design-milk.com/egypt-inspired-jewelry-by-jamie-spinello/
Handmade from copper wire that has been rolled, cut, configured, soldered, and blackened.
Production requirements for me to produce this piece is apx 2 weeks.
Geometric Necklace designs:
http://www.etsy.com/shop/jamiespinello/search?search_query=geometric+necklace
more GEOMETRIC designs:
http://www.etsy.com/shop/jamiespinello/search?search_query=geometric
I make bracelets, cuffs, earrings and rings too! Don't forget to check out my other designs!
http://www.jamiespinello.etsy.com
All of my designs are under copyright protection © Jamie Spinello 2012
Registered with the US Copyright Office > If you see an unauthorized site selling my work please let me know.
Copper Geometric Necklace
$40.00
Copper Geometric Necklace - Art Deco Revival - Inspired by Armatures of Bridge Structures and the contour of an Ivy leaf
★NOTE★This item is MADE TO ORDER and requires 2 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658
All other items in my shop require production time before shipment.
*Made to Order* In finish and material of your choosing - use drop down for options
pictured: Handmade from copper wired that has been rolled, cut, configured, soldered, and blackened then sealed to protect the finish
made and designed by me in my studio in Tx
size: options 15" / 17" adjustment, 16" / 18" adjustment - pick either one please
The design I created reminds me of a Truss bridge and the shape of an Ivy leaf.
GEOMETRIC and ARCHITECTURE inspired works:
http://www.etsy.com/shop/jamiespinello/search?search_query=architecture
I make bracelets, cuffs, earrings and rings too! Don't forget to check out my other designs!
http://www.jamiespinello.etsy.com
All of my designs are under copyright protection © Jamie Spinello 2012
Registered with the US Copyright Office > If you see an unauthorized site selling my work please let me know.
★NOTE★This item is MADE TO ORDER and requires 2 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658
All other items in my shop require production time before shipment.
*Made to Order* In finish and material of your choosing - use drop down for options
pictured: Handmade from copper wired that has been rolled, cut, configured, soldered, and blackened then sealed to protect the finish
made and designed by me in my studio in Tx
size: options 15" / 17" adjustment, 16" / 18" adjustment - pick either one please
The design I created reminds me of a Truss bridge and the shape of an Ivy leaf.
GEOMETRIC and ARCHITECTURE inspired works:
http://www.etsy.com/shop/jamiespinello/search?search_query=architecture
I make bracelets, cuffs, earrings and rings too! Don't forget to check out my other designs!
http://www.jamiespinello.etsy.com
All of my designs are under copyright protection © Jamie Spinello 2012
Registered with the US Copyright Office > If you see an unauthorized site selling my work please let me know.
Layered Bangles Cuff
$72.00
Layered Bangles Cuff - Blackened Copper - Handmade in my Texas studio
~MADE TO ORDER~ ♀ ♂
★NOTE★This item is MADE TO ORDER and requires 2 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658
All other items in my shop require production time before shipment.
sizing: S 5"-6", M 6"-7", L 7"-8" , or custom measurement
(measurements based on circumference of wrist)
►Each is made to match my prototype and is one of a kind and unique (please specify size)
Designed for the inner gypsy, the traveler/explorer, the eccentric.
For this cuff, I have created a multi-bangle effect, yet the "bangles" are all spaced and adhered to rods so that they stay in place and together. I have always loved the look of multiple bangles worn on the arm, but I always lose them and am not fond of the constant up and down clanking that occurs all day long while wearing them, hence my bangle copper cuff design was born.
►More cuffs found here:
http://www.etsy.com/shop/jamiespinello?section_id=6228357
►This particular design is inspired by gypsies and vagabonds that travel the world playing music, selling wears or dancing. I have read one tradition of wearing bangles (churi) that is an indian one, where it is a symbol of matrimony. The traditional churi bangles are made of glass and Indian women will try to wear as many small glass bangles as possible at her wedding and the honeymoon will end when the last bangle breaks. I have seen images of belly dancers wearing bangles as well, and on further research found that many would wear bangles because of the ability to shake the wrists to create a jingling sound while dancing. I love that there is a strong tradition of women wearing bangles and I think they look beautiful on everyone.
This design is 100% made by me in my Tx studio and is 100% copper.
Finish in all photos is the same, but in different light settings.
►►►Please allow 2-3 weeks for production.
Sizing: One size fits most~ It fits wrists anywhere from 5.5-8" in circumference.
my shop:
http://www.jamiespinello.etsy.com
~MADE TO ORDER~ ♀ ♂
★NOTE★This item is MADE TO ORDER and requires 2 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658
All other items in my shop require production time before shipment.
sizing: S 5"-6", M 6"-7", L 7"-8" , or custom measurement
(measurements based on circumference of wrist)
►Each is made to match my prototype and is one of a kind and unique (please specify size)
Designed for the inner gypsy, the traveler/explorer, the eccentric.
For this cuff, I have created a multi-bangle effect, yet the "bangles" are all spaced and adhered to rods so that they stay in place and together. I have always loved the look of multiple bangles worn on the arm, but I always lose them and am not fond of the constant up and down clanking that occurs all day long while wearing them, hence my bangle copper cuff design was born.
►More cuffs found here:
http://www.etsy.com/shop/jamiespinello?section_id=6228357
►This particular design is inspired by gypsies and vagabonds that travel the world playing music, selling wears or dancing. I have read one tradition of wearing bangles (churi) that is an indian one, where it is a symbol of matrimony. The traditional churi bangles are made of glass and Indian women will try to wear as many small glass bangles as possible at her wedding and the honeymoon will end when the last bangle breaks. I have seen images of belly dancers wearing bangles as well, and on further research found that many would wear bangles because of the ability to shake the wrists to create a jingling sound while dancing. I love that there is a strong tradition of women wearing bangles and I think they look beautiful on everyone.
This design is 100% made by me in my Tx studio and is 100% copper.
Finish in all photos is the same, but in different light settings.
►►►Please allow 2-3 weeks for production.
Sizing: One size fits most~ It fits wrists anywhere from 5.5-8" in circumference.
my shop:
http://www.jamiespinello.etsy.com
